BZZQJ - DECRARUST WHITE & WTB, 060-0001N
- MSDS: BZZQJ
- Manufacturer: DECRATREND PAINT CORP
- Product Name: DECRARUST WHITE & WTB, 060-0001N
- National Stock Number: 8010-00N009912
Product Identification
Product ID:DECRARUST WHITE & WTB, 060-0001N
MSDS Date:01/01/1992
FSC:8010
NIIN:00N009912
MSDS Number: BZZQJ
Responsible Party
CITY OF INDUSTRY, CA 91746
US
Emergency Phone: 818-333-4592
Info Phone: 818-333-4592
Cage: 42590
Contractor
Telephone: 818-333-4592
Cage: 42590
Ingredients
2.0 @ 68F
Fraction By Weight: 60%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: N/K
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 10%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
3.50 LB/GL (419 G/L)
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESS INHAL OF VAPS CAN
CAUSE NASAL & RESP IRRIT, WEAK, DIZZ, FATG, NAUS, HDCH & POSS UNCON
& EVEN ASPHY. ASPIR INTO LUNGS CAN CAUSE CHEM PNEUMIT WHICH CAN BE
FATAL. SKIN: PRLNG/RPTD CO NT CAN CAUSE MOD IRRIT, DEFAT, DERM.
EYE: CAN CAUSE SEV IRRIT, REDNESS, TEARING & BLURRED VISION. (EFTS
OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: SKIN ABSORPTION: ORG SOLV ARE EASILY
ABSORBED, DRYING OF SKIN, REDNESS/DERM ARE SIGNS OF RPTD/OVEREXP TO
THEIR DEFAT ACTION. INGEST: CAN CAUSE GI IRRIT, NAUS, VOMIT &
DIARR. CHRONIC: PROLONG ED OR REPEATED EXPOSURE ABOVE TLV MAY
RESULT IN PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYE: FLUSH IMMED W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
MIN. TAKE TO MD FOR MED TREATMENT. SKIN: WASH AFFECTED AREA W/SOAP
& WATER. REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT PERSISTS. INHAL:
REMOVE T O FRESH AIR. RESTORE BRTHG. TREAT SYMPTOMATICALLY. CONSULT
MD. INGEST: DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE
VOMITING. CONSULT MD/POISON CONTROL CENTER IMMED. TREAT
SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:102F,39C
Lower Limits:0.8%
Upper Limits:6.0%
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . DURING EMERGENCY CONDITIONS OVEREXPOSURE TO
DEMP PROD MAY CAUSE IMMED/DELAYED HLTH HAZARDS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE, CONTAIN,
OR ABSORB WITH INERT MATERIALS (SAND, VERMICULITE, ETC). TRANSFER
TO CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS,
STREAMS, OR OTHER B ODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE OR USE NEAR SOURCES OF
HIGH TEMPERATURES, NEAR FIRE OR OPEN FLAME, OR OTHER IGNITION
SOURCES.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED USE NIOSH/MSHA APPROVED
ORGANIC VAPOR AND MIST, SUPPLIED AIR OR SCBA.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT, SUCH AS NITRILE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. EMERGENCY EYEWASH
& DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.1 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC, ON THERMAL
DECOMPOSITION.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.